Single Layer RC Car Display Stand
One shelf, the full size base with the charger bay built in, and the same rail system as every other TE Racing stand. This is the one to start with, and the one you can grow later without buying it twice.
Price excludes shipping and tax. Shipping is added at checkout by region and tax where applicable.
Shipping is added at checkout by region: $24 West, $39 Central and South, $59 East, $75 Alaska and Hawaii. Returns accepted within 14 days, you pay return shipping. Shipping & returns · Terms
Set your colors
Pick a scale, a base color for the frame and side rails, and an accent color for the shelves, sleeves and caps. The photo updates as you choose, so you can see the exact combination before you buy it.
The real stand, photographed, in the colors you picked.
1. Scale
1/10 is the common on road and off road size. 1/8 buggies and truggies need the wider fit.
2. Base & side rail color
Applies to the base and the lower, middle and upper side rails. Three choices.
3. Shelf, sleeve & cap color
Applies to the shelves, the side sleeve covers and the top cap. Nine choices.
Price excludes shipping and tax. Shipping is added at checkout by region: $24 West, $39 Central and South, $59 East, $75 Alaska and Hawaii. Returns accepted within 14 days, you pay return shipping. Shipping & returns · Terms
What is in the box
Everything arrives in the two colors you picked and goes together without tools. There is no hardware bag to lose and nothing to source yourself.
The base
The full size base plate with the TE PowerDock bay underneath, sized to hold up to two power supplies and a battery charger.
Lower & upper rails
The TE FlexRail uprights that carry the shelf and fold the stand flat. Printed in your base color.
One shelf
The car shelf, with TE ShelfGrip anti slip pads already fitted. Printed in your accent color.
Sleeves & caps
The sleeve covers that slide over the rails and the caps that finish the uprights, also in your accent color.
Where a single layer stand earns its space
A one car stand sounds like the entry model. In practice it is the build that gets used the most, because it goes everywhere the car goes.
On the bench at home
Wheels off the ground means the diff and the shocks are not sitting compressed between race weekends, and it means you can get a hex driver under the chassis without holding the car with your other hand. It clears a shelf without you having to move anything above it.
At the track
The single is the stand you carry from the pit table to the drivers stand and back. The PowerDock keeps the charger and the power supply under the car instead of spread across the table, so the whole charging setup moves as one thing and you stop hunting for the barrel plug that fell behind someone else's toolbox.
In the hauler
TE FoldLock collapses it flat in a few seconds. Folded, it slides in beside a pit bag rather than claiming a shelf of its own. That is the difference between a stand you bring every weekend and one that stays in the garage after the second race.
1/10 or 1/8, which single do you want
The two versions are not the same part scaled up. The 1/8 build uses a wider base and wider shelf, which is why it is priced separately.
1/10 scale at $79
This is the version most people want. It covers 1/10 buggies, touring cars, drift chassis and short course trucks, and it is the size the dimensions on this page describe. If you race at a club track in the Bay Area or anywhere else in the USA, this is almost certainly your stand.
1/8 scale at $89
The 1/8 single is built wider through the base and shelf for 1/8 buggies and truggies. It uses the same fold mechanism and the same color options. Dimensions differ from the 1/10 build, so email us before ordering if you need the exact numbers for a shelf or a case.
When to measure first
Two situations are worth a message before you order: an unusually wide short course body, and a rock crawler with a lot of ride height. Send us the chassis width and the overall height and we will tell you honestly whether the single works or whether you want a different build.
Two colors, seventeen ways to combine them
Every stand is a two color build. You choose the structure color and the accent color separately, and we print both to order.
The accent list is red, green, purple, navy blue, blue, yellow, orange, pink and teal. Clear on the base with a bright accent is the combination that photographs best, and black with navy blue is the one that disappears into a display cabinet. Use the configurator to see your combination priced before you commit.
Single layer stand FAQ
How tall is the single layer RC car display stand?
The 1/10 scale single sits on a 10.00 x 12.00 inch base, or 254 x 305 mm. Contact us for the exact height. That is short enough to live on a bookshelf or a workbench without blocking anything behind it, and it is the same base footprint as the double and the triple, so upgrading later does not cost you table space. The 1/8 scale single is a wider build, so contact us for its exact dimensions before you order if clearance matters.
Will the single stand hold my 1/10 buggy, touring car or short course truck?
Yes. The shelf and rail spacing were designed around common 1/10 platforms, so buggies, touring cars, drift chassis and short course trucks all sit properly. Very wide short course bodies and tall rock crawlers are the two cases worth checking first, so measure your chassis width and email us the number if you are unsure. We would rather answer that question than send you a stand that does not fit.
What comes with the single car stand?
The base with the TE PowerDock bay, the lower and upper side rails, one shelf with TE ShelfGrip anti slip pads, the sleeve covers and the top caps, in the two colors you chose. It arrives ready to use, with room in the base for your charger, discharger and transmitter. The RC car and the equipment in our photos are shown as a display example and are not included.
Can I turn a single stand into a double or triple later?
Yes. That is the reason TE FlexRail exists. A $25 upgrade kit adds the next set of rails, a sleeve and a shelf onto the stand you already own, so a single becomes a double and a double becomes a triple. Tell us the accent color you originally ordered and we print the kit to match.
How much is the single layer stand and what does the price include?
The 1/10 scale single tier stand is $79 and the 1/8 scale single is $89. That is the stand itself in your chosen base and accent colors. Tax and shipping are calculated on your address and added at checkout, so you see the full total before you pay and there is no surprise at the end.
How much is shipping and how long does it take?
Shipping is a flat rate by region, added at checkout: $24 to the US West, $39 to the Central and Southern states, $59 to the East, and $75 to Alaska and Hawaii. Every stand ships in a 24 by 12 by 8 inch box from San Jose, California by USPS Ground Advantage. Allow 3 to 7 business days for us to print your build, then 2 to 6 business days in transit.
What is your return policy?
You have 14 days from delivery to start a return. Email shon@towerenterpriseinc.com within those 14 days and we will walk you through it. Returns go back by mail and you pay the return shipping. We would much rather answer a fit question before you buy than process a return after, so send us your chassis and we will tell you straight.
Not sure one shelf is enough?
The double layer stand at $99 holds two cars in this same footprint, and the triple layer stand at $119 holds three. If you would rather start here and decide later, the upgrade kits are $25. You can also see the whole line on the TE Racing page or head back to the Tower Enterprise home page.
| Build | Holds | Height (in) | 1/10 price | 1/8 price |
|---|---|---|---|---|
| Single | 1 car | Contact for specs | $79 | $89 |
| Double | 2 cars | Contact for specs | $99 | $109 |
| Triple | 3 cars | Contact for specs | $119 | Not offered |
Order your single layer stand
Pick your colors in the configurator, see the exact combination, then check out in the notes.